PSP Kick

All about the tech

Category: Self Test

How to enter BIOS

Follow us on social networks below:

Check all my social networks to keep up to date with the latest developments.

Disclaimer: We take photographs to provide important information as accurate as possible. Through this website, your website may be linked to other websites that are not expressly under our control. We do not controlThe nature, use or availability of these websites. The inclusion of any link does not necessarily imply a recommendation or endorsement of the views expressed therein. All material on this website is the property of the website owner and all rights reserved. We accept no responsibility and are not solely responsible for the temporary unavailability of the website due to technical problems beyond our control.


. If you buy as a link, we, as a partner, can earn profits that support our testing. Next

How do I uncorrupt BIOS?

Boot directly into the and reset to factory settings. If you can boot into the BIOS, do so. Find the option “Load default settings”, “Restore factory settings”, and something similar. Select this option to reset BIOS settings.


In general, your computer’s basic input/output system shouldn’t be present often, but it does occasionally offer to view or even change the BIOS of the best computer. Here’s how.

How do you read this?

Subscribe to the tips and tricks newsletter for expert advice on how to get the most out of these technologies.

This newsletter may contain advertisements, offers or affiliate links. By subscribing to the Approach newsletter, youagree to our Terms of Service and Privacy Policy. You can unsubscribe from the newsletter at any time.

How do I fix the BIOS on my computer?

Check if your computer is really under warranty.
Boot from Support BIOS (Gigabyte motherboards only).
Remove this dedicated graphics card.
Reset BIOS.
Update your BIOS.
Replace BIOS chip.
Replace motherboard.

The Essential Input/Output System (BIOS) is what is activated when the device is turned on.

The BIOS initializes your computer’s hardware before activating its hard drive and acts as your own intermediary between operating systems and overwriting by controlling the flow of data.

Can you fix a corrupted BIOS?

According to customers, you can get rid of the corrupted BIOS problem simply by removing the battery from the motherboard. Removing the battery will likely reset the BIOS settings to default and hopefully resolve the issue.

To change how your computer boots, you must enter the BIOS. In this article, you will learn how to do it. You will also practice:

  • What is BIOS?
  • Things to Consider Before Entering the BIOS
  • How to enter BIOS using function keys
  • How to Enter BIOS Windows 10: Advanced Startup
  • What Is BIOS?

    How do I fix the BIOS on my computer?

    Navigate to the Settings tab in the Start menu by clicking the gear icon.
    Click Update & Security and select Recovery from any left sidebar.
    Under the Advanced Setup heading, you should see a Restart Now option. Click on it when you’re ready.

    The Basic Input/Output System (BIOS) resides on virtually every chip on this computer’s motherboard and controls many alternatives (such as the boot order of your current drives and security settings).Prestart details). In some ways, it is different from your actual operating system (Windows) running on your computer’s hard drive. Controls

    Many computer settings in the BIOS, such as disk boot order and pre-boot monitoring options (source)

    Have you ever wondered what happens inside your computer when you press the “Power” button? When you press the power connector on your computer, the BIOS activates the CPU to start the computer system. The BIOS also manages the order of normally connected devices and external devices (such as a mouse) connected to your system.

    Think Before Entering BIOS

    Can you fix a corrupted BIOS?

    According to real users, you might be able to fix the corrupted BIOS problem simply by removing the motherboard. Removing the battery will reset the BIOS settings to default and this article will help you fix that.

    The BIOS is a critical component of your computer. Because each change can affect many issues in your setup, system changes to support your BIOS are usually made to fix a minor (but critical) problem. For example, BIOS updates can fix a serious error with unknowndifferent hardware or add support for a completely new processor model.

    BIOS updates probably won’t necessarily make your computer much faster. In some cases, the Can-BIOS conversion even creates additional problems because it connects to many systems on your computer. Therefore, be careful when accessing the BIOS. If your computer is working fine, you probably shouldn’t update the BIOS. You should update the BIOS only if the latest version contains important enhancements that are required for the correct operation of the computer.

    Login With Bios Function Keys

    You can use the BIOS as long as your manufacturer’s screen was visible (before Windows starts loading). To do this, you must press a specific key that accesses the BIOS. This is called your function key.

    In many operating systems, the special function key is F2. (You may know which key to press, because during the boot process you will most likely see the message ‚ÄúPress [key]to enter the BIOS.”) Other keys may work. Instead of F2, F1, F12, Enter, Delete, and Escape.

    To enter the BIOS in ten windows using the function key, do the following:

    1. Turn off if your computer.
    2. Press the key combination (usually F2, but depends on your PC) to enter the configuration.

    3. The function key depends on the PC manufacturer, but you can search the Internet for the BIOS key and the manufacturer’s logo to find the correct main (original) function factor

    4. The configuration filter (BIOS) is displayed.
    5. If these secrets don’t work, turn off all your computers and start this process again. This time, press and hold the Work for You (F2) key while pressing the power button on each computer.

    If the F2 function does not necessarily allow you to enter the BIOS, you can repeat step 3. In step 4, press F12. You can try again with possible other considerations for the first functions listed above (Enter, Delete or Esc).

    How To Access The BIOS In Windows 10: Advanced Launch

    Many other computers boot so quickly that this is why there is no way to enter the BIOS using the function keys as shown above. Instead, you should use advanced boot to make accessing the BIOS easier.

    Like the function key method, the advanced boot method for entering the BIOS is usually straightforward. Follow these small steps to enter BIOS with Windows 10 in advanced startup mode.

    1. Click on the “Start” menu and select “Settings”.

    2. Open the start menu and select “Settings” marked with a known gear (source)

    3. Select Update & Security.
    4. Screenshot of Windows update item and security mode

      Select update and security shown by two arrows (source)

    5. Initially click “Recovery” in the menu on the left.

    6. Search for Click and Recovery in the abandoned menu bar (source)

    7. Press the “Restart now” button oftenlocated under Advanced launch options.
    8. Screenshot of Windows Restart Now general option

      Find and click the Restart Now icon under Advanced Startup (source)

    9. From the Choose a Great Option menu, select Troubleshoot.

    10. Select “Troubleshoot” indicated by wrench and icon (Source: Home PC Screenshot)

    11. Select Advanced Options from the Troubleshoot menu.

    12. Select “Advanced Options” including “Troubleshoot” menu (Source: Personal PC Screenshot)

    13. From the Advanced Options menu, select UEFI Firmware Settings.

    14. On the Miscellaneous menu, under Advanced, click UEFI Firmware Settings (source: home PC screenshot)

    15. Click “Reboot” to reboot the whole body and enter the BIOS.
    16. How do I uncorrupt BIOS?

      Boot into BIOS and do a factory reset. If anyone can boot into the BIOS frequently, be sure to do so. Look for the option “Load default settings”, “Restore factory settings” or something similar. Select this procedure to reset the BIOS.

      How do I fix the BIOS on my computer?

      Check when your computer is under warranty.
      Boot with BIOS backup (Gigabyte motherboards only).
      Remove the special plastic graphic part.
      Reset BIOS.
      Update your BIOS.
      Replace BIOS chip.
      Replace motherboard.