PSP Kick

All about the tech

Helps fix computer errors


of 10, Deployment Image Servicing and Management is a command-line service for administrators to prepare, modify, and restore system images such as Windows Recovery Environment, Windows Setup, and Windows Preinstallation Environment (WinPE). However, as a general rule, anyone can use this tool with a county recovery image to fix common engine issues.

When you need to troubleshoot a specific error, determine why your device has stopped booting properly, or troubleshoot performance issues, you can usually use this dedicated System File Checker command line tool to skip missing or corrupted full body files and replace Image Recovery . . The limitation of this approach is that the SFC command will not work if one or more Windows files are selected in the image. Esland you are in this scenario, you can use the install.wim image via DISM to restore the image and then use the SFC tool to restore the configuration without reinstalling windows from scratch you need /p>

In this type of Windows 10 guide, we’ll show you how to use the command-line DISM and SFC tools to get your PC back to a healthy working state that requires a fresh install.

  • Using DISM to restore images created by Windows 10
  • How to run SFC for troubleshooting in Windows 10
  • Warning. The requirements outlined in this guide are often not devastating, but since you will be making changes to the system, it is always a good idea to create a temporary full backup for now. For

    How To Use DISM To Enhance Your Windows 10 Image

    Windows 10 DISM command tool has three troubleshooting options including “CheckHealth”, “ScanHealth” and “RestoreHealth” which you specifically want to run in policy. Depending on the severity of each problem, you can also use the general param”RestoreHealth” meter to restore the image available in your region with other original files.

    DISM Command With CheckHealth Parameter

    The CheckHealth process using the Deployment Servicing Image and the Management Command Tool allows you to quickly determine if there is any corruption in your local Windows 10 screen image. However, this option does not perform any repairs.

    Follow these steps to check for image issues in Windows 10 using DISM:

    1. Open Start.
    2. Search for command prompt, type a term, right-click the first result, and select Run as administrator.
    3. Type each of the following commands for instant verification and press Enter:

      DISM/Online/Cleanup-Image Windows/checkhealth

      Source: Central

    After completing the basic steps, DISM runs and checks for any data corruption that needs to be repaired. Command

    Disable With ScanHealth Option

    Why is my computer in DOS mode?

    1. On a Microsoft Windows desktop PC, mode is a true MS-DOS environment. This allowed more complex programs written before Windows or computer systems with limited resources to run anyth program. Today, all versions of Windows have only one Windows command line, which allows you to view any computer from the command line.

    The ScanHealth option performs an extended check to determine if there are issues with the brand of the operating system.

    < l>

  • Open Start.
  • Search for command prompt, right-click the first result and select Run as boss.
  • Type the following command to perform an advanced DISM scan and press Enter:


    Is DISM safe to run?

    When to Use DISM
    Although you usually have to use machines, they are the ones you should turn to for help when you encounter frequent crashes, crashes, and errors, but SFC does not restore your system files or can no longer work at all.

    Source: Windows headquarters.

  • Once customers have completed these steps, it may take a few minutes for the Advanced Scan to evaluate and determine if the Windows 10 image needs to be restored.

    DISM Command With RestoreHealth Parameter

    If there are problems with the system image, you can use DISM with the RestoreHealth option to automatically find and fix common problems.

    To repair Windows Image 10 issues using the DISM command tool, follow these steps:

    1. Open Start.
    2. Search for command prompt, right-click on the first running result and select Run as administrator.
    3. Type the following command phrase to restore your Windows 10 photo and press Enter:


      Source: Windows headquarters.

      How do I use Command Prompt to fix my computer?

      Click Startup Repair.
      Click System Restore.
      Choose your username.
      Enter password.
      Type “cmd” in the most valuable search field.
      Right-click Command Prompt and select “Run as administrator”.
      At the command prompt, type sfc /scannow and press Enter.

      A small note. If the steering seems to be stuck at any point, this is normal behavior. After a few minutes, the process will complete successfully.

    After you complete these steps, Deployment and Servicing Image Management will typically connect to Windows Update on the Internet, which can download and replace corrupted music (if any).

    Fix Problems With DISM Targeting The Install.wim Image

    The dism command usually doesn’t fix problems, but if you’re having trouble replacing corrupted files, or if you’re really not connected to the world wide web, you should provide an additional image with a source parameter that will do the job. To look after. Typically, you can use the “install.wim” or “install.esd” instruction from another computer, install a bootable share, or install a Windows 10 ISO file. However, you need to make sure that the files match the version, format, and language of the version associated with The Windows 10 you’re trying to fix a problem with y.

    Download Windows 10 ISO

    If we need a source with a lot of files, we recommend using a media creation tool to download a fresh copy for Windows 10.

    To download The Lodge ISO from Windows 10, follow these steps:

    1. Open this Microsoft support site.
    2. Click the “Download tool now” button.
    3. Double-click MediaCreationToolxxxx.exe to begin installation.
    4. Click the “Accept” button to accept these terms.
    5. Choose to create the installation (USB drive, DVD, or ISO file) required for the other PC variant.

      Source: Windows headquarters.

    6. Click Next.

    7. Click the Next button again.

      Select language, architecture, version

      Source: and hence Windows Central

    8. Select an ISO file option.

      Source: Windows headquarters.

    9. Click Next.
    10. Select a path to save the Windows 10 ISO file.
    11. Click the save button.
    12. Click on the shortcut to open the file folder in File Explorer.

      Source: Windo HQws.

    13. Click the Done button.
    14. Double-click the Windows.iso file to mount the image.
    15. Under ‘This PC’, confirm the drive letter for your primary media in the left pane.

      Source: Windows headquarters.

    After the calculations are complete, you can continue with the DISM application using the Source option to restore your local Windows 10 image.

    Restore Windows 10 Recovery Image

    To run the Deployment Image Servicing and Management Tool from another source image (install.wim), do the following:

    1. Open Start.
    2. Search for “Leadership”, right-click the first result and select “Run as administrator”.
    3. Type the following command frequently to restore one of our Windows 10 images and press Enter:

      DISM /Online /Cleanup-Image /RestoreHealth /Source:E:\Sources\install.wim

      Source: Windows headquarters.

      In the instructions, replace “F” with the computer letter corresponding to the ISO add point in File Explorer. Enter

    4. (optionalo) Type the following command to restrict the use of Windows Update and press Enter:

      DISM /Online /Cleanup-Image /RestoreHealth /Source:E\Sources\install.wim /LimitAccess

    5. (Optional) Type the following variation of the first “End the same task” command and press Enter:

      DISM /Online /Cleanup-Image /RestoreHealth /Source:wim:E:\Sources\install.wim:1 /LimitAccess

      In the F:\Sources command, expand the path to the install.wim file.

    After you complete these steps, the term command will scan and fix the most common problems with the install.wim file type you provided as a source of ideas.

    Troubleshoot DISM with Image

    If you have a password-protected install.esd image, you can also use it when you need to repair corrupted files in Windows 10.

    To use DISM with an efficient install.esd image as a starting point for restoring Windows 10, do the following:

    1. Open Start.
    2. Search for Command Prompt, right-click the top result, and select each Run as administrator option.

    3. Type the command to restore the image from behind the install.esd file and press Enter:

      DISM /Online /Cleanup-Image /RestoreHealth /Source:C:\ESD\Windows\sources\install.esd

      Source: Central

      In the Windows command, change C:\ESD\Windows\sources to the path to the entire “.esd” file (if present).

    4. (Optional) To focus on using Windows Update, type the following command and press Enter:

      Should I run DISM or SFC first?

      Should I run DISM or SFC first? SFC is a tool for restoring shared Windows files and human body structures. SFC scans the integrity of all protected operating system data, including data that is not on the top of the hard drive. It must be used before running DISM.

      DISM /Online /Cleanup-Image /RestoreHealth /Source:C:\ESD\Windows\sources\install.esd /LimitAccess